If the battery of the PAPR electric welding helmet cannot be charged, what should be done

If the battery of the PAPR welding helmet cannot be charged, you can handle it according to the following steps:

Check the charging equipment

Charger inspection: Ensure that the charger is compatible with the battery and check if it is working properly. Try using different chargers or charging cables to rule out the possibility of charger failure.

Charging port inspection: Check the charging port on the helmet for any damage or dirt. If necessary, clean the port or replace the charging cable.

Check the battery

Battery installation check: Ensure that the battery is correctly installed inside the helmet and has good contact.

Battery status check: Inspect the battery for any obvious damage or deformation. If necessary, replace the battery. Other possible solutions

Environmental temperature influence: Ensure that the charging environment temperature is within an appropriate range and avoid charging in overly cold or hot conditions.

Contact the manufacturer: If all the above measures are ineffective, contact the manufacturer's customer service or professional maintenance personnel for further inspection and repair.